SONOS IN-CEILING SPEAKERS
Create a built-in sound system with these passive speakers, and enjoy clear sound and comfortable listening from anywhere in the room.ems. Connect to your TV via HDMI.
Designed to disappear
The specially-designed round, or optional square, grilles can be painted to match your ceiling.
Sound customized to your home
Amp unlocks Trueplay™, which accounts for the size, construction, and layout of the room where the speakers are placed and adjusted for the best possible sound.
Need help from a professional?
Get an expert to help you design and install your dream Sonos system. They'll take care of everything, from drilling into your ceiling and walls to connecting your TV.
One high-excursion polypropylene woofer produces rich mid and low ranges.
One-inch tweeter produces crisp, high frequencies.
44Hz - 20KHZ (±3dB)
8 Ohms nominal
89dB SPL (2.83V/1m)
This software measures the acoustics of the room then fine-tunes the speaker. Sonos Amp and supported iOS device required.
5 watts minimum
130 watts maximum
Diameter: 235 mm
Cut-out diameter: 210 mm
Depth: 120 mm
2.28 kg each
How are these speakers optimised for Sonos Amp?
When connected, Sonos Amp will automatically detect these speakers and optimise the sound. Amp also enables Trueplay tuning for these speakers with a supported iOS device.
What type of wire should be used to connect the speakers to Amp?
You should use 16ga or larger wire that is rated for use within walls and ceilings.
How many In-Ceiling Speakers by Sonos and Sonance can be powered by a single amplifier?
A single Sonos Amp can power up to three pairs, or six total. Other amplifiers can power only two pairs or four total.
Can these speakers be installed outdoors?
These speakers are not rated for outdoor use and should only be installed indoors.
Where should I instal these speakers?
Place your speakers in locations that will provide smooth and evenly balanced coverage. If the room is large, a second or third pair of speakers is recommended for the optimal listening experience. If you want to use these speakers as part of a surround sound system for a home cinema, they should be installed above and slightly behind the primary seating position.
Will these replace my existing in-ceiling speakers?
If your cutout is the same diameter as that of the speaker (8.25"), it will fit and may require a small amount of drywall be removed. If the cutout is larger, drywall will be required to patch and re-cut a hole to fit.